|
|
新做的板子，出现问题，打印如下
发表于 2015-4-19 12:59:07
浏览：6928
|
回复：2
打印
只看该作者
[复制链接]
楼主
[ 0.731398] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[ 0.731455] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[ 0.731513] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[ 0.731567] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[ 0.731609] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[ 0.731648] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[ 0.731683] DDR DEBUG: Channel b:
[ 0.731730] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[ 0.731787] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[ 0.731845] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[ 0.731902] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[ 0.731954] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[ 0.731996] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[ 0.732035] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[ 0.810201] bio: create slab <bio-0> at 0
[ 0.812079] Enter firefly_noatx8_init
[ 0.812564] firefly_noatx8_probe 51
[ 0.813292] SCSI subsystem initialized
[ 0.813789] usbcore: registered new interface driver usbfs
[ 0.813943] usbcore: registered new interface driver hub
[ 0.814228] usbcore: registered new device driver usb
[ 0.817275] rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
[ 0.821824] rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
[ 0.823310] rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
[ 0.824787] rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter
[ 0.825608] rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
[ 0.828507] media: Linux media interface: v0.10
[ 0.828650] Linux video capture interface: v2.00
[ 0.828806] pps_core: LinuxPPS API ver. 1 registered
[ 0.828850] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.828932] PTP clock support registered
[ 0.829382] rockchip_temp_probe,line=362
[ 0.830244] tsadc ff280000.tsadc: initialized
[ 0.831493] rockchip_ion_parse_dt: num_heaps = 1
[ 0.831553] 0: 0 3 vmalloc 0x (null)
[ 0.832370] Rockchip ion module is successfully loaded (v1.0)
[ 0.832905] Advanced Linux Sound Architecture Driver Initialized.
[ 0.834150] Bluetooth: Core ver 2.16
[ 0.834281] NET: Registered protocol family 31
[ 0.834324] Bluetooth: HCI device and connection manager initialized
[ 0.834386] Bluetooth: HCI socket layer initialized
[ 0.834438] Bluetooth: L2CAP socket layer initialized
[ 0.834533] Bluetooth: SCO socket layer initialized
[ 0.835201] cfg80211: Calling CRDA to update world regulatory domain
[ 0.837455] act8846_i2c_probe,line=898
[ 0.838903] act8846_parse_dt,line=746
[ 0.840425] act8846_i2c_probe: act8846_pmic_hold=1
[ 0.840495] act8846_i2c_probe: act8846_pmic_sleep=1
[ 0.840553] act8846_i2c_probe: act8846_pmic_cpu_det_gpio=1
[ 0.840612] act8846_i2c_probe: act8846_pmic_usb_hub_reset_gpio=1
[ 0.843105] act_dcdc1: 1200 mV
[ 0.846829] vccio: 3300 mV
[ 0.849458] vdd_logic: 700 <--> 1500 mV at 1100 mV
[ 0.853211] act_dcdc4: 2000 mV
[ 0.855049] vccio_sd: 1800 <--> 3300 mV at 3300 mV
[ 0.857980] act_ldo2: 1050 mV
[ 0.860941] act_ldo3: 1800 mV
[ 0.863844] act_ldo4: 3300 mV
[ 0.866738] act_ldo5: 3300 mV
[ 0.869630] act_ldo6: 1100 mV
[ 0.872546] vcc_18: 1800 mV
[ 0.875480] act_ldo8: 1850 mV
[ 0.882105] vdd_arm: 712 <--> 1500 mV at 1000 mV
[ 0.888535] vdd_gpu: 712 <--> 1500 mV at 1000 mV
[ 0.889503] rk808_i2c_probe,line=1368
[ 0.891159] The device is not rk808 -11
[ 0.891424] rk808: probe of 0-001b failed with error -11
[ 0.895479] Switching to clocksource arch_sys_counter
[ 0.916023] usb_battery_charger_detect_synop , battery_charger_detect 1, pass DCD, dcd_state = 1
[ 0.961305] rk-fb rockchip-fb: rk fb ion client create success!
[ 0.961376] rk-fb rockchip-fb: rockchip framebuffer driver probe
[ 0.962462] rk-screen rk_screen.9: rockchip screen probe success
[ 0.963247] rk32-lvds rk32-lvds: rk32 lvds driver probe success
[ 0.963972] rk32-edp ff970000.edp: screen is not edp!
[ 0.964046] rk32-edp: probe of ff970000.edp failed with error -22
[ 0.965298] rk3288-lcdc lcdc0: can't find power_ctr node for lcdc0
[ 0.966059] graphics fb0: rockchip framebuffer registerd:fb0
[ 0.967097] graphics fb1: rockchip framebuffer registerd:fb1
[ 0.967649] graphics fb2: rockchip framebuffer registerd:fb2
[ 0.968204] graphics fb3: rockchip framebuffer registerd:fb3
[ 0.968757] graphics fb4: rockchip framebuffer registerd:fb4
[ 0.970451] rk_iommu ff930300.vopb_mmu: (vopb) Enabled
[ 0.970880] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
[ 0.970954] rk3288-lcdc lcdc0: wakeup from standby!
[ 1.104988] alloc_buffer:ion_phy_addr=0x10000000
[ 1.148315] fb0:phy:10000000>>vir:f0191000>>len:0x1800000
[ 1.264207] rk3288-lcdc lcdc0: lcdc0 probe ok, iommu enabled
[ 1.265372] rockchip_set_mux:warning ignore bank num 15
[ 1.265815] rockchip_set_mux:warning ignore bank num 15
[ 1.266215] rockchip_set_mux:warning ignore bank num 15
[ 1.266613] rockchip_set_mux:warning ignore bank num 15
[ 1.267007] rockchip_set_mux:warning ignore bank num 15
[ 1.267401] rockchip_set_mux:warning ignore bank num 15
[ 1.268315] rockchip_set_mux:warning ignore bank num 15
[ 1.268860] rockchip_set_mux:warning ignore bank num 15
[ 1.269709] rockchip_set_mux:warning ignore bank num 15
[ 1.270207] rockchip_set_mux:warning ignore bank num 15
[ 1.271037] rockchip_set_mux:warning ignore bank num 15
[ 1.271529] rockchip_set_mux:warning ignore bank num 15
[ 1.272355] rockchip_set_mux:warning ignore bank num 15
[ 1.272876] rockchip_set_mux:warning ignore bank num 15
[ 1.296205] NET: Registered protocol family 2
[ 1.297660] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.298149] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.298648] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.298799] TCP: reno registered
[ 1.298853] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.298984] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.299724] NET: Registered protocol family 1
[ 1.300337] Unpacking initramfs...
[ 1.810583] Freeing initrd memory: 2516K (c4bf0000 - c4e65000)
[ 1.812104] hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
[ 1.813540] probe device ff9a0000.vpu_service
[ 1.813977] vpu_service: power on
[ 1.815131] checking hw id 4831
[ 1.816191] vpu_service set to auto frequency mode
[ 1.816362] vcodec vpu_service: vcodec ion client create success!
[ 1.817483] rk_iommu ff9a0800.vpu_mmu: (vpu) Enabled
[ 1.817591] rk_iommu ff9a0800.vpu_mmu: (vpu) Disabled
[ 1.817645] rk_iommu ff9a0800.vpu_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x2e277000
[ 1.817693] vpu_service: power off...
[ 1.817777] done
[ 1.817809] init success
[ 1.817971] probe device ff9c0000.hevc_service
[ 1.818565] hevc_service: power on
[ 1.819679] checking hw id 6867
[ 1.820537] vcodec hevc_service: vcodec ion client create success!
[ 1.821524] rk_iommu ff9c0440.hevc_mmu: (hevc) Enabled
[ 1.821631] rk_iommu ff9c0440.hevc_mmu: (hevc) Disabled
[ 1.821682] rk_iommu ff9c0440.hevc_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x2e274000
[ 1.821730] hevc_service: power off...
[ 1.821815] done
[ 1.821846] init success
[ 1.822213] rknandbase v1.0 2014-03-31
[ 1.822828] rknand_probe clk rate = 148500000
[ 1.823201] rknand_driver:ret = 0
[ 1.824278] audit: initializing netlink socket (disabled)
[ 1.824392] type=2000 audit(1.310:1): initialized
[ 1.826682] bounce pool size: 64 pages
[ 1.842184] fuse init (API version 7.22)
[ 1.843422] msgmni has been set to 1456
[ 1.849418] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.849480] io scheduler noop registered
[ 1.849520] io scheduler deadline registered
[ 1.849839] io scheduler cfq registered (default)
[ 1.851304] Console: switching to colour frame buffer device 240x67
[ 1.900331] rga ff920000.rga: rga ion client create success!
[ 1.900739] rga: Driver loaded succesfully
[ 1.902211] IEP Power ON
[ 1.902325] iep ion client create success!
[ 1.903332] rk_iommu ff900800.iep_mmu: (iep) Enabled
[ 1.903424] IEP Power OFF
[ 1.903470] rk_iommu ff900800.iep_mmu: (iep) Disabled
[ 1.903522] rk_iommu ff900800.iep_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x2e26a000
[ 1.903584] IEP Driver loaded succesfully
[ 1.903884] Module initialized.
[ 1.906391] dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
[ 1.906462] dma-pl330 ffb20000.pdma: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
[ 1.910842] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
[ 1.910915] dma-pl330 ff250000.pdma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 1.911645] pwm-voltage-regulator pwm_regulator.23: unable to request PWM, trying legacy API
[ 1.911708] pwm-voltage-regulator pwm_regulator.23: unable to request legacy PWM
[ 1.911750] pwm_regulator_probe:error
[ 1.911824] platform pwm_regulator.23: Driver pwm-voltage-regulator requests probe deferral
[ 1.912898] rk_serial.c v1.8 2014-03-04
[ 1.913551] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
[ 1.914185] serial ff180000.serial: membase 0xf0172000
[ 1.923943] loop: module loaded
[ 1.925797] SCSI Media Changer driver v0.25
[ 1.926829] tun: Universal TUN/TAP device driver, 1.6
[ 1.926877] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.928539] stmmac_probe_config_dt: Can not read property: pmu_regulator.
[ 1.928596] stmmac_probe_config_dt: Can not read property: pmu_enable_level.
[ 1.928644] stmmac_probe_config_dt: clock input or output? (input).
[ 1.928689] stmmac_probe_config_dt: TX delay(0x30).
[ 1.928731] stmmac_probe_config_dt: RX delay(0x10).
[ 1.928913] stmmac_probe_config_dt: is rockchip,rk3288-gmac
[ 1.928955] stmmc_pltfr_init:
[ 1.928992] stmmc_pltfr_init: ERROR: Get power-gpio failed.
[ 1.929068] stmmc_pltfr_init: ERROR: Request gmac phy reset pin failed.
[ 1.929107] stmmc_pltfr_init: init for RGMII
[ 1.929146] tx delay=0x30
[ 1.929146] rx delay=0x10
[ 1.930573] stmmac - user ID: 0x10, Synopsys ID: 0x35
[ 1.930614] Normal descriptors
[ 1.930645] Ring mode enabled
[ 1.930678] DMA HW capability register supported
[ 1.930717] RX Checksum Offload Engine supported (type 2)
[ 1.930755] TX Checksum insertion supported
[ 1.930787] Wake-Up On Lan supported
[ 1.930921] Enable RX Mitigation via HW Watchdog Timer
[ 1.932245] PPP generic driver version 2.4.2
[ 1.932711] PPP BSD Compression module registered
[ 1.932757] PPP Deflate Compression module registered
[ 1.932821] PPP MPPE Compression module registered
[ 1.932864] NET: Registered protocol family 24
[ 1.932959] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 1.933009] CSLIP: code copyright 1989 Regents of the University of California.
[ 1.933054] Rockchip WiFi SYS interface (V1.00) ...
[ 1.933306] usbcore: registered new interface driver catc
[ 1.933436] usbcore: registered new interface driver kaweth
[ 1.933481] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 1.933654] usbcore: registered new interface driver pegasus
[ 1.933782] usbcore: registered new interface driver rtl8150
[ 1.933907] usbcore: registered new interface driver r8152
[ 1.933947] hso: drivers/net/usb/hso.c: Option Wireless
[ 1.934148] usbcore: registered new interface driver hso
[ 1.934295] usbcore: registered new interface driver asix
[ 1.934422] usbcore: registered new interface driver ax88179_178a
[ 1.934569] usbcore: registered new interface driver cdc_ether
[ 1.934694] usbcore: registered new interface driver cdc_eem
[ 1.934817] usbcore: registered new interface driver dm9601
[ 1.934939] usbcore: registered new interface driver dm9620
[ 1.935092] usbcore: registered new interface driver smsc75xx
[ 1.935245] usbcore: registered new interface driver smsc95xx
[ 1.935385] usbcore: registered new interface driver gl620a
[ 1.935513] usbcore: registered new interface driver net1080
[ 1.935640] usbcore: registered new interface driver plusb
[ 1.935767] usbcore: registered new interface driver rndis_host
[ 1.935894] usbcore: registered new interface driver cdc_subset
[ 1.936017] usbcore: registered new interface driver zaurus
[ 1.936147] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 1.936324] usbcore: registered new interface driver int51x1
[ 1.936468] usbcore: registered new interface driver kalmia
[ 1.936599] usbcore: registered new interface driver ipheth
[ 1.936741] usbcore: registered new interface driver sierra_net
[ 1.936871] usbcore: registered new interface driver cx82310_eth
[ 1.937026] usbcore: registered new interface driver cdc_ncm
[ 1.937155] usbcore: registered new interface driver qmi_wwan
[ 1.937297] usbcore: registered new interface driver cdc_mbim
[ 1.937340] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.940562] ehci_rk_probe f1a00000 f1a00010
[ 1.940624] rockchip_ehci_host ff500000.usb: Rockchip On-Chip EHCI Host Controller
[ 1.940724] rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
[ 1.941719] rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
[ 1.958442] rockchip_ehci_host ff500000.usb: USB 0.0 started, EHCI 1.00
[ 1.958681] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.958744] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.958797] usb usb1: Product: Rockchip On-Chip EHCI Host Controller
[ 1.958847] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
[ 1.958893] usb usb1: SerialNumber: ff500000.usb
[ 1.960300] hub 1-0:1.0: USB hub found
[ 1.960380] hub 1-0:1.0: 1 port detected
[ 1.987940] ehci_rk_probe ok
[ 1.988388] usbcore: registered new interface driver cdc_acm
[ 1.988434] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.988616] usbcore: registered new interface driver usblp
[ 1.988759] usbcore: registered new interface driver cdc_wdm
[ 1.988959] usbcore: registered new interface driver usb-storage
[ 1.989089] usbcore: registered new interface driver ums-alauda
[ 1.989213] usbcore: registered new interface driver ums-cypress
[ 1.989353] usbcore: registered new interface driver ums-datafab
[ 1.989478] usbcore: registered new interface driver ums_eneub6250
[ 1.989601] usbcore: registered new interface driver ums-freecom
[ 1.989725] usbcore: registered new interface driver umLoisin0,
usbcore: registered new interface driver ums-jumpshot
[ 1.989968] usbcore: registered new interface driver ums-karma
[ 1.990091] usbcore: registered new interface driver ums-oneBeuch: L din.990se7]iasbdrrvers ... : registered new interface driver ums-sddr09
[ 1.990340] usbcore: registered new interface driver ums-sddr55
[ 1.990463] usbcore: registered new interface driver ums-usbat
[ 1.990758] usbcore: registered new interface driver usbserial
[ 1.990893] usbcore: registered new interface driver usbserial_generic
[ 1.991014] usbserial: USB Serial support registered for generic
[ 1.991149] usbcore: registered new interface driver option
[ 1.991257] usbserial: USB Serial support registered for GSM modem (1-port)
[ 1.991571] usbcore: registered new interface driver trancevibrator
[ 1.991616] usb20_otg: version 3.10a 21-DEC-2012
[ 1.992643] f1a80040
[ 1.992686] Core Release: 3.10a
[ 1.992725] Setting default values for core params
[ 1.993135] Using Buffer DMA mode
[ 1.993176] Periodic Transfer Interrupt Enhancement - disabled
[ 1.993215] Multiprocessor Interrupt Enhancement - disabled
[ 1.993257] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 1.993293] ^^^^^^^^^^^^^^^^^Device Mode
[ 1.993340] Dedicated Tx FIFOs mode
[ 1.993398] pcd_init otg_dev = eda00e80
[ 1.993880] usb20_otg ff580000.usb: DWC OTG Controller
[ 1.993976] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 2
[ 1.994081] usb20_otg ff580000.usb: irq 55, io mem 0x00000000
[ 1.994269] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.994330] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.994382] usb usb2: Product: DWC OTG Controller
[ 1.994427] usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[ 1.994474] usb usb2: SerialNumber: ff580000.usb
[ 1.995785] hub 2-0:1.0: USB hub found
[ 1.995864] hub 2-0:1.0: 1 port detected
[ 1.996781] usb20_host: version 3.10a 21-DEC-2012
[ 2.000300] f1b00040
[ 2.000346] Core Release: 3.10a
[ 2.000383] Setting default values for core params
[ 2.000787] Using Buffer DMA mode
[ 2.000829] Periodic Transfer Interrupt Enhancement - disabled
[ 2.000868] Multiprocessor Interrupt Enhancement - disabled
[ 2.000909] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 2.000944] ^^^^^^^^^^^^^^^^^^Host Mode
[ 2.001024] usb20_host ff540000.usb: DWC OTG Controller
[ 2.001114] usb20_host ff540000.usb: new USB bus registered, assigned bus number 3
[ 2.001217] usb20_host ff540000.usb: irq 57, io mem 0x00000000
[ 2.001380] Init: Power Port (0)
[ 2.001563] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.001623] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.001675] usb usb3: Product: DWC OTG Controller
[ 2.001721] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[ 2.001767] usb usb3: SerialNumber: ff540000.usb
[ 2.003059] hub 3-0:1.0: USB hub found
[ 2.003150] hub 3-0:1.0: 1 port detected
[ 2.004786] .. rk pwm remotectl v1.0 init
[ 2.005050] remotectl probe j=0x0
[ 2.005564] input: ff680000.pwm as /devices/ff680000.pwm/input/input0
[ 2.006189] pwm enable val=0x646205
[ 2.007069] usbcore: registered new interface driver xpad
[ 2.007245] usbcore: registered new interface driver usb_acecad
[ 2.007405] usbcore: registered new interface driver aiptek
[ 2.007631] usbcore: registered new interface driver gtco
[ 2.007794] usbcore: registered new interface driver hanwang
[ 2.007947] usbcore: registered new interface driver kbtab
[ 2.008122] usbcore: registered new interface driver wacom
[ 2.009234] sensor_register_slave:mma8452,id=17
[ 2.009284] sensor_register_slave:cm3217,id=44
[ 2.009324] sensor_register_slave:cm3218,id=45
[ 2.016027] rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0
[ 2.016189] i2c /dev entries driver
[ 2.018499] IR NEC protocol handler initialized
[ 2.018548] IR RC5(x) protocol handler initialized
[ 2.018585] IR RC6 protocol handler initialized
[ 2.018620] IR JVC protocol handler initialized
[ 2.018654] IR Sony protocol handler initialized
[ 2.018688] IR RC5 (streamzap) protocol handler initialized
[ 2.018726] IR SANYO protocol handler initialized
[ 2.018761] IR MCE Keyboard/mouse protocol handler initialized
[ 2.019016] usbcore: registered new interface driver uvcvideo
[ 2.019058] USB Video Class driver (1.1.1)
[ 2.019103] CamSys driver version: v0.19.0, CamSys head file version: v0.8.0
[ 2.022267] D1:camsys_platform_probe(1061): 1-gpios-cifpower: gpio=236
[ 2.022354] D1:camsys_platform_probe(1064): gpios-cifpower: gpio_request
[ 2.022419] D1:camsys_platform_probe(1066): 1-gpios-cifpower: gpio_request=0
[ 2.022481] D1:camsys_platform_probe(1075): gpios-cifpower: 236 high
[ 2.022699] D1:camsys_mipiphy_probe_cb(163): ff910000.isp mipi phy0 probe success(reg_phy: 0x0 reg_vir: 0x0 size: 0x0)
[ 2.023161] D1:camsys_mipiphy_probe_cb(160): ff910000.isp mipi phy1 probe success(reg_phy: 0xff968000 reg_vir: 0xf19b0000 size: 0x4000)
[ 2.025245] D1:camsys_platform_probe(1208): ff910000.isp memory:
[ 2.025309] D1:camsys_platform_probe(1218): Register memory (phy: 0xff910000 vir: 0xf19e0000 size: 0x10000)
[ 2.025370] D1:camsys_platform_probe(1213): I2c memory (phy: 0x2da10000 vir: 0xeda10000 size: 0x1000)
[ 2.025422] D1:camsys_platform_probe(1233): Probe ff910000.isp device success
[ 2.028473] device-mapper: uevent: version 1.0.3
[ 2.029236] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[ 2.030160] Bluetooth: HCI UART driver ver 2.2
[ 2.030211] Bluetooth: HCI H4 protocol initialized
[ 2.030250] Bluetooth: HCILL protocol initialized
[ 2.036275] cpufreq version 1.0, suspend freq 1200 MHz
[ 2.036861] cpuidle: using governor ladder
[ 2.036908] cpuidle: using governor menu
[ 2.037027] Synopsys Designware Multimedia Card Interface Driver
[ 2.037865] dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
[ 2.038688] dwmmc_rockchip ff0f0000.rksdmmc: Using internal DMA controller.
[ 2.039159] 3230..dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]
[ 2.039213] Line3235..dw_mci_init_slot: The rk_sdmmc Ver 1.12 2014-07-08
[ 2.039622] 1357..dw_mci_set_ios: no card. [mmc0]
[ 2.056777] 1357..dw_mci_set_ios: no card. [mmc0]
[ 2.076500] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
[ 2.076515] dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
[ 2.076530] dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized
[ 2.076857] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
[ 2.077717] dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
[ 2.077917] 3224..dw_mci_init_slot: fmin=300000, fmax=50000000 [mmc1]
[ 2.078428] 1357..dw_mci_set_ios: no card. [mmc1]
[ 2.096115] 1357..dw_mci_set_ios: no card. [mmc1]
[ 2.108644] mmc0: BKOPS_EN bit is not set
[ 2.110567] rk_sdmmc: BOOT Bus speed=0Hz,Bus width=8bits.[mmc0]
[ 2.112880] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
[ 2.112908] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[ 2.115970] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
[ 2.115989] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
[ 2.116341] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
[ 2.116567] dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
[ 2.116716] 3230..dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc2]
[ 2.116847] 1357..dw_mci_set_ios: no card. [mmc2]
[ 2.127946] rk_sdmmc: BOOT
[ 2.127946] execute tuning: candidates_degree = SDMMC_SHIFT_DEGREE_0 SDMMC_SHIFT_DEGREE_90 SDMMC_SHIFT_DEGREE_180 SDMMC_SHIFT_DEGREE_INVALID[mmc0]
[ 2.128048] mmc0: new HS200 MMC card at address 0001
[ 2.128307] mmcblk0: mmc0:0001 AWMB3R 14.5 GiB
[ 2.128602] resource: 0x000400000 -- 0x001400000 (16 MB)
[ 2.128614] boot: 0x001400000 -- 0x002400000 (16 MB)
[ 2.128623] misc: 0x002400000 -- 0x002800000 (4 MB)
[ 2.128632] backup: 0x002800000 -- 0x005c00000 (52 MB)
[ 2.128641] linuxroot: 0x005c00000 -- 0x3a3a00000 (14814 MB)
[ 2.128658] mmcblk0: p1 p2 p3 p4 p51357..dw_mci_set_ios: no card. [mmc1]
[ 2.135474] 1357..dw_mci_set_ios: no card. [mmc2]
[ 2.155159] 1357..dw_mci_set_ios: no card. [mmc2]
[ 2.155338] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
[ 2.155351] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
[ 2.155595] leds-gpio leds.31: pins are not configured from the driver
[ 2.155828] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.157137] usbcore: registered new interface driver usbhid
[ 2.157148] usbhid: USB HID core driver
[ 2.157478] ashmem: initialized
[ 2.157583] logger: created 256K log 'log_main'
[ 2.157691] logger: created 256K log 'log_events'
[ 2.157783] logger: created 256K log 'log_radio'
[ 2.157874] logger: created 256K log 'log_system'
[ 2.158876] input: rk29-keypad as /devices/ff100000.adc/key.34/input/input1
[ 2.159463] rockchip-pinctrl ff770000.pinctrl: pin gpio6-8 already requested by ; cannot claim for 2-0010
[ 2.159478] rockchip-pinctrl ff770000.pinctrl: pin-200 (2-0010) status -22
[ 2.159489] rockchip-pinctrl ff770000.pinctrl: could not request pin 200 on device rockchip-pinctrl
[ 2.159501] ES8323 2-0010: Error applying setting, reverse things back
[ 2.160200] es8323 probe error
[ 2.160218] ES8323: probe of 2-0010 failed with error -11
[ 2.160245] i2c-core: driver [ES8323] using legacy suspend method
[ 2.160253] i2c-core: driver [ES8323] using legacy resume method
[ 2.160551] rockchip-hdmi-spdif rockchip-hdmi-spdif.27: ASoC: CPU DAI (null) not registered
[ 2.160581] rockchip_hdmi_spdif_audio_probe() register card failed:-517
[ 2.160597] platform rockchip-hdmi-spdif.27: Driver rockchip-hdmi-spdif requests probe deferral
[ 2.160782] rockchip-es8323 rockchip-es8323.29: ASoC: CODEC (null) not registered
[ 2.160801] rockchip_es8323_audio_probe() register card failed:-517
[ 2.160816] platform rockchip-es8323.29: Driver rockchip-es8323 requests probe deferral
[ 2.160902] u32 classifier
[ 2.160909] Actions configured
[ 2.160922] Netfilter messages via NETLINK v0.30.
[ 2.160985] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.161322] ctnetlink v0.93: registering with nfnetlink.
[ 2.161393] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 2.161402] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 2.161680] xt_time: kernel timezone is -0000
[ 2.161891] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.162033] arp_tables: (C) 2002 David S. Miller
[ 2.162074] TCP: cubic registered
[ 2.162081] Initializing XFRM netlink socket
[ 2.162307] NET: Registered protocol family 10
[ 2.162845] mip6: Mobile IPv6
[ 2.162884] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.163004] sit: IPv6 over IPv4 tunneling driver
[ 2.163340] NET: Registered protocol family 17
[ 2.163367] NET: Registered protocol family 15
[ 2.163421] Bridge firewalling registered
[ 2.163433] Ebtables v2.0 registered
[ 2.163597] Bluetooth: RFCOMM TTY layer initialized
[ 2.163624] Bluetooth: RFCOMM socket layer initialized
[ 2.163633] Bluetooth: RFCOMM ver 1.11
[ 2.163642] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.163649] Bluetooth: BNEP filters: protocol multicast
[ 2.163662] Bluetooth: BNEP socket layer initialized
[ 2.163670] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.163683] Bluetooth: HIDP socket layer initialized
[ 2.163716] l2tp_core: L2TP core driver, V2.0
[ 2.163731] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 2.163740] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 2.163912] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[ 2.163924] wlan_platdata_parse_dt: wifi_chip_type = bcmwifi
[ 2.163933] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[ 2.163943] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
[ 2.163953] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[ 2.163976] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 156, flags = 0.
[ 2.164000] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 158, flags = 0.
[ 2.164009] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[ 2.164038] [WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 1.8V
[ 2.164085] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[ 2.164133] [BT_RFKILL]: Enter rfkill_rk_init
[ 2.164265] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 147.
[ 2.164284] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 155.
[ 2.164301] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 157.
[ 2.164316] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 154.
[ 2.164332] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 159.
[ 2.164380] [BT_RFKILL]: Request irq for bt wakeup host
[ 2.164478] [BT_RFKILL]: ** disable irq
[ 2.164568] [BT_RFKILL]: ap6335 device registered.
[ 2.165277] rk3288-hdmi ff980000.hdmi: rk3288 hdmi probe sucess.
[ 2.165618] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
[ 2.165640] rk3288_init_suspend
[ 2.165649] rk3288_suspend_init enter
[ 2.165776] rk3288_suspend_init: pm_ctrbits =40017
[ 2.165814] gpio_get_dts_info suspend:8
[ 2.165824] gpio_get_dts_info resume:8
[ 2.165830] rockchip,pmic-suspend_gpios:1007c30 1007c40 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[ 2.165864] rockchip,pmic-resume_gpios:2007c32 2007c42 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[ 2.166020] clks_gating_suspend_init:clkgt info ok
[ 2.166115] Registering SWP/SWPB emulation handler
[ 2.166467] ddrfreq: verion 1.2 20140526
[ 2.166480] ddrfreq: normal 456MHz video_1080p 0MHz video_4k 456MHz dualview 0MHz idle 0MHz suspend 200MHz reboot 456MHz
[ 2.166490] ddrfreq: auto-freq=0
[ 2.166497] ddrfreq: auto-freq-table[0] 240MHz
[ 2.166504] ddrfreq: auto-freq-table[1] 324MHz
[ 2.166511] ddrfreq: auto-freq-table[2] 456MHz
[ 2.166518] ddrfreq: auto-freq-table[3] 528MHz
[ 2.168248] act_ldo3: operation not allowed
[ 2.168493] vga_edid_probe: turn on ldo3 done.
[ 2.168528] act_ldo4: operation not allowed
[ 2.168767] vga_edid_probe: turn on ldo done.
[ 2.168795] act_ldo2: operation not allowed
[ 2.169031] vga_edid_probe: turn on ldo2 done.
[ 2.169059] act_ldo8: operation not allowed
[ 2.169294] vga_edid_probe: turn on ldo done.
[ 2.361782] rockchip_i2c ff160000.i2c: Addr[0x0050] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x0
[ 2.369667] rockchip_i2c ff160000.i2c: I2C_CON: start bit is set
[ 2.370661] unable to read EDID block.
[ 2.588086] rockchip_i2c ff160000.i2c: Addr[0x0050] wait event timeout, state: 2, is_busy: 1, error: 0, complete_what: 0x2, ipd: 0x20
[ 2.596952] unable to read EDID block.
[ 2.814408] rockchip_i2c ff160000.i2c: Addr[0x0050] wait event timeout, state: 2, is_busy: 1, error: 0, complete_what: 0x2, ipd: 0x20
[ 2.823274] unable to read EDID block.
[ 2.823283] vga-ddc: read and parse edid failed errno:-5.
[ 2.823288] vga_edid_probe: success. 10
[ 2.823398] firefly_vga_get_enable 180, 0
[ 2.823406] firefly_vga_get_status 186
[ 2.823419] firefly_vga_set_enable 159 enable:1
[ 2.823442] firefly_vga_enable 130 start
[ 2.823449] firefly_switch_fb 55
[ 2.823456]
[ 2.823456] rk_fb_switch_screen lcdc_id 0 type 1 enable 1
[ 2.823466] fb0 win id 1 state 1
[ 2.823472] regulator-dummy: disabling
[ 2.823480] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
[ 2.823500] fb1 win id 0 state 0
[ 2.823506] fb2 win id 2 state 0
[ 2.823511] fb3 win id 3 state 0
[ 2.823516] fb4 win id 4 state 0
[ 2.823521]
[ 2.823521] rk_fb_switch_screen lcdc_id 0 type 1 enable 1 done
[ 2.823521]
[ 2.823545] VGA ENABLE
[ 2.823808] rockchip-hdmi-spdif rockchip-hdmi-spdif.27: ASoC: CPU DAI (null) not registered
[ 2.823831] rockchip_hdmi_spdif_audio_probe() register card failed:-517
[ 2.823843] platform rockchip-hdmi-spdif.27: Driver rockchip-hdmi-spdif requests probe deferral
[ 2.823948] rockchip-es8323 rockchip-es8323.29: ASoC: CODEC (null) not registered
[ 2.823963] rockchip_es8323_audio_probe() register card failed:-517
[ 2.823974] platform rockchip-es8323.29: Driver rockchip-es8323 requests probe deferral
[ 2.824055] pcd_pullup, is_on 0
[ 2.824089] file system registered
[ 2.824650] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 2.824659] android_usb gadget: Number of LUNs=2
[ 2.824666] lun0: LUN: removable file: (no medium)
[ 2.824672] lun1: LUN: removable file: (no medium)
[ 2.824784] android_usb gadget: android_usb ready
[ 2.824856] sensor_init: Probe name sensors
[ 2.824871] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
[ 2.825391] rtc_hym8563 0-0051: setting system clock to 2000-01-01 00:00:07 UTC (946684807)
[ 2.830700] usbcore: registered new interface driver snd-usb-audio
[ 2.830734] ALSA device list:
[ 2.830740] No soundcards found.
[ 2.832259] Freeing unused kernel memory: 2364K (c0a8f000 - c0cde000)
[ 2.832654] rockchip-hdmi-spdif rockchip-hdmi-spdif.27: rk-hdmi-spdif-hifi <-> rockchip-spdif mapping ok
[ 2.833283] rockchip-es8323 rockchip-es8323.29: ASoC: CODEC (null) not registered
[ 2.833308] rockchip_es8323_audio_probe() register card failed:-517
[ 2.833322] platform rockchip-es8323.29: Driver rockchip-es8323 requests probe deferral
[ 2.854261] udevd[147]: starting version 175
[ 2.869655] Unable to handle kernel paging request at virtual address 3d7e7f44
[ 2.869660] Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP ARM
[ 4.439605] Bad mode in interrupt handler detected |
|
