|
|
在Android 底下開APP失敗的log
[ 97.973229] E:camsys_sysctl_extdev(333): Sysctl 11 failed, because gpio is NULL!
[ 97.981784] E:camsys_sysctl_extdev(333): Sysctl 8 failed, because gpio is NULL!
[ 97.990154] E:camsys_sysctl_extdev(333): Sysctl 7 failed, because gpio is NULL!
[ 98.000666] E:camsys_i2c_write(77): i2c write dev(addr:0x6c) failed!
[ 98.007052] E:camsys_sysctl_extdev(333): Sysctl 7 failed, because gpio is NULL!
[ 98.014348] E:camsys_sysctl_extdev(333): Sysctl 8 failed, because gpio is NULL!
[ 98.021592] E:camsys_sysctl_extdev(333): Sysctl 11 failed, because gpio is NULL!
[ 98.030081] D1:camsys_mrv_clkin_cb(361): camsys_marvin clock in turn off
[ 98.036842] D1:camsys_mrv_clkout_cb(391): camsys_marvin clock out turn off
[ 98.045722] D1:camsys_extdev_deregister(308): Extdev(dev_id: 0x2000000) is deregister success
[ 98.054156] D1:camsys_irq_disconnect(635): All thread disconnect camsys_marvin irq success!
[ 98.062380] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[ 98.069818] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[ 98.077307] D1:camsys_release(734): camsys_marvin(ed880d10) is closed
[ 98.201812] Enter::rk29_hw_params----52
[ 98.206560] Enter:rk29_hw_params, 86, rate=44100
[ 98.211146] Enter:rk29_hw_params, 104, LRCK=64
[ 98.431345] Enter::rk29_hw_params----52
[ 98.436094] Enter:rk29_hw_params, 86, rate=44100
[ 98.440668] Enter:rk29_hw_params, 104, LRCK=64
[ 98.563933] init: sys_prop: permission denied uid:10019 name:sys.glibgui
[ 98.791445] Enter::rk29_hw_params----52
[ 98.796292] Enter:rk29_hw_params, 86, rate=44100
[ 98.800971] Enter:rk29_hw_params, 104, LRCK=64
[ 99.013679] Enter::rk29_hw_params----52
[ 99.018491] Enter:rk29_hw_params, 86, rate=44100
[ 99.023046] Enter:rk29_hw_params, 104, LRCK=64 |
|
