【求助】rk3128开发板烧写源码编译的system.img后无法启动

碧海蓝天。。。。

各位大侠：
    帮忙看一下。我遇到的问题
   先在开发板烧写下载的FirePrime_Android5.1_201603030926.img升级可以正常启动，再单独烧写源码编译的kernel也能正常启动，最后单独烧写源码编译的system.img启动后停在fireflylogo界面。
[    2.953585] fs_mgr: Running /sbin/resize2fs on /dev/block/platform/1021c000.rksdmmc/by-name/system
[    2.956463] resize2fs: resize2fs 1.42.9 (28-Dec-2013)resize2fs: /sbin/resize2fs: Bad magic number in super-block while trying to open /dev/block/platform/1021c000.rksdmmc/by-name/systemresize2fs: Couldn't find valid filesystem superblock.resize2fs: resize2fs terminated by exit(1)
[    2.959437] EXT4-fs (mmcblk0p12): VFS: Can't find ext4 filesystem
[    2.959625] fs_mgr: __mount(source=/dev/block/platform/1021c000.rksdmmc/by-name/system,target=/system,type=ext4)=-1
[    2.960364] fs_mgr: Failed to mount an un-encryptable or wiped partition on/dev/block/platform/1021c000.rksdmmc/by-name/system at /system options: noauto_da_alloc error: Invalid argument
[    2.968740] EXT4-fs (mmcblk0p8): recovery complete
[    2.969176] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[    2.969340] fs_mgr: __mount(source=/dev/block/platform/1021c000.rksdmmc/by-name/cache,target=/cache,type=ext4)=0
[    2.974515] EXT4-fs (mmcblk0p10): recovery complete
[    2.974548] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[    2.974698] fs_mgr: __mount(source=/dev/block/platform/1021c000.rksdmmc/by-name/metadata,target=/metadata,type=ext4)=0
[    3.031369] mmc_host mmc2: Bus speed (slot 0) = 37500000Hz (slot req 37500000Hz, actual 37500000HZ div = 0)
[    3.031407] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]
[    3.031580] rk_sdmmc: BOOT Bus speed=37500000Hz,Bus width=4bits.[mmc2]
[    3.032489] Cam_Powerdowm
[    3.033224] min_w = 800,min_h = 600 ,max_real_w = 1600,max_real_h = 1200,max_w = 1600,max_h =1200
[    3.034682] ov2659_front_4(rk_cam_sensor:169): write reg(0x103, val:0x1) failed, try to write again!
[    3.035962] ov2659_front_4(rk_cam_sensor:169): write reg(0x103, val:0x1) failed, try to write again!
[    3.036540] mmc2: new high speed SDIO card at address 0001
[    3.037288] ov2659_front_4(rk_cam_sensor:169): write reg(0x103, val:0x1) failed, try to write again!
[    3.037323] ov2659_front_4(rk_cam_sensor:387): write array failed!
[    3.037339] ov2659_front_4(rk_cam_sensor:671): soft reset failed
[    3.037339]
[    3.037519] EXT4-fs (mmcblk0p9): 2 orphan inodes deleted
[    3.037540] EXT4-fs (mmcblk0p9): recovery complete
[    3.050567] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[    3.050731] fs_mgr: __mount(source=/dev/block/platform/1021c000.rksdmmc/by-name/userdata,target=/data,type=ext4)=0
[    3.050816] init: fs_mgr_mount_all returned an error
[    3.051191] init: fs_mgr_mount_all returned unexpected error 255
[    3.053822] Unable to find swap-space signature
[    3.053912] ov2659_front_4(rk_cam_sensor:335): read reg(0x300a val:0x0) failed, try to read again!
[    3.053935] fs_mgr: swapon failed for /dev/block/zram0
[    3.053945] ov2659_front_4(rk_cam_sensor:699): read chip id failed
[    3.053976] bcmsdh_register: register client driver
[    3.054215] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[    3.054382] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[    3.054404] bus num (host idx)=2, slot num (rca)=1
[    3.054418] found adapter info 'DHD generic adapter'
[    3.055012] F1 signature read @0x18000000=0x1540a9a6
[    3.058699] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4
[    3.059896] DHD: dongle ram size is set to 524288(orig 524288) at 0x0
[    3.060080] wifi_platform_get_mac_addr
[    3.060097] ======== bcm_wlan_get_mac_address ========
[    3.060112] [WLAN_RFKILL]: rockchip_wifi_mac_addr: enter.
[    3.060133] [WLAN_RFKILL]: falsh wifi_custom_mac_addr=[00:00:00:00:00:00]
[    3.060149] [WLAN_RFKILL]: This mac address is not valid, ignored...
[    3.060170] dhd_conf_set_chiprev: chip=0xa9a6, chiprev=0
[    3.060252] dhd_conf_set_conf_path_by_nv_path: config_path=/system/etc/firmware/config.txt
[    3.061381] wl_create_event_handler(): thread:wl_event_handler:79 started
[    3.061394] tsk Enter, tsk = 0xdde6149c
[    3.062100] dhd_attach(): thread:dhd_watchdog_thread:7a started
[    3.062240] dhd_attach(): thread:dhd_dpc:7b started
[    3.062263] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
[    3.062364] dhd_attach(): thread:dhd_rxf:7c started
[    3.062392] dhd_deferred_work_init: work queue initialized
[    3.062662] dhdsdio_probe_init: set use_rxchain 0 from config.txt
[    3.063262] Cannot change disksize for initialized device
[    3.064847] Unable to find swap-space signature
[    3.064946] fs_mgr: swapon failed for /dev/block/zram0
[    3.076877] Dongle Host Driver, version 1.201.59.5 (r506368)
[    3.076877] Compiled in drivers/net/wireless/bcmdhd on Oct 25 2016 at 14:55:37
[    3.077699] Register interface [wlan0]  MAC: 94:a1:a2:a3:ff:e8
[    3.077699]
[    3.077730] dhd_prot_ioctl : bus is down. we have nothing to do
[    3.077815] bcmsdh_oob_intr_unregister: Enter
[    3.077832] bcmsdh_oob_intr_unregister: irq is not registered
[    3.077852] dhd_txglom_enable: enable 0
[    3.077865] dhd_bus_devreset:  WLAN OFF DONE
[    3.077958] wifi_platform_set_power = 0
[    3.077974] ======== PULL WL_REG_ON LOW! ========
[    3.077988] [WLAN_RFKILL]: rockchip_wifi_power: 0
[    3.107529] EXT4-fs (mmcblk0p9): Unrecognized mount option "background_gc=on" or missing value
[    3.117831] init: cannot find '/system/bin/logd', disabling 'logd'
[    3.118530] init: cannot find '/system/bin/lmkd', disabling 'lmkd'
[    3.118597] init: cannot find '/system/bin/servicemanager', disabling 'servicemanager'
[    3.118656] init: cannot find '/system/bin/vold', disabling 'vold'
[    3.118705] init: cannot find '/system/bin/surfaceflinger', disabling 'surfaceflinger'
[    3.121802] bat_cap: oldcap path is /sys/devices/2006c000.adc
[    3.121903] bat_cap: oldcap_path no exist
[    3.122241] binder: 126:126 transaction failed 29189, size 0-0
[    3.125596] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
[    3.125636] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
[    3.125936] init: property 'ro.product.manufacturer' doesn't exist while expanding '${ro.product.manufacturer}'
[    3.125972] init: cannot expand '${ro.product.manufacturer}' while writing to '/sys/class/android_usb/android0/iManufacturer'
[    3.126009] init: property 'ro.product.model' doesn't exist while expanding '${ro.product.model}'
[    3.126037] init: cannot expand '${ro.product.model}' while writing to '/sys/class/android_usb/android0/iProduct'
[    3.126072] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
[    3.126102] init: property 'ro.product.usbfactory' doesn't exist while expanding '$ro.product.usbfactory'
[    3.126131] init: cannot expand '$ro.product.usbfactory' while writing to '/sys/class/android_usb/android0/f_mass_storage/inquiry_string'
[    3.127129] rtk_btusb: btchr_open: BT usb char device is opening
[    3.127150] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[    3.127183] rtk_btusb: btchr_open: BT usb char device is opening
[    3.127198] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[    3.127237] rtk_btusb: btchr_open: BT usb char device is opening
[    3.127253] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[    3.127282] rtk_btusb: btchr_open: BT usb char device is opening
[    3.127296] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[    3.133601] init: cannot find '/system/bin/sh', disabling 'console'
[    3.133775] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
[    3.133912] android_usb: already disabled
[    3.139663] read descriptors
[    3.139693] read strings
[    3.139747] pcd_pullup, is_on 1
[    3.160425] Cam_Powerdowm
[    3.180110] [WLAN_RFKILL]: wifi shut off power.
[    3.180133] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 0
[    3.180148] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[    3.180262] dhd_module_init: Exit err=0
[    3.229302] ret: 0
[    3.258862] soc-camera-pdrv gc0329_front_5: Probing gc0329_front_5
[    3.327717] ret: 0
[    3.475290] Cam_Powerdowm
[    3.475838] min_w = 640,min_h = 480 ,max_real_w = 640,max_real_h = 480,max_w = 640,max_h =480
[    3.495951] gc0329_front_5(rk_cam_sensor:169): write reg(0xfc, val:0x16) failed, try to write again!
[    3.496921] gc0329_front_5(rk_cam_sensor:169): write reg(0xfc, val:0x16) failed, try to write again!
[    3.497884] gc0329_front_5(rk_cam_sensor:169): write reg(0xfc, val:0x16) failed, try to write again!
[    3.525738] gc0329_front_5(rk_cam_sensor:335): read reg(0x0 val:0x0) failed, try to read again!
[    3.525763] gc0329(917): gc0329 read chip id high byte failed
[    3.525763]
[    3.525780] gc0329(924): error: gc0329 mismatched   pid = 0x0
[    3.525780]
[    3.525797] gc0329_front_5(rk_cam_sensor:718): error: mismatched   pid = 0x0
[    3.525797]
[    3.632707] Cam_Powerdowm
[    3.701606] ret: 0
[    3.731175] soc-camera-pdrv gc2035_back_6: Probing gc2035_back_6
[    3.819696] ret: 0
[    3.967293] Cam_Powerdowm
[    3.967313] rk_cam_io(1128):SENSOR_PWRSEQ_PWRDN failed
[    3.967387] soc-camera-pdrv gc2035_back_6: Cannot get I2C adapter #2. No driver?
[    4.075526] Cam_Powerdowm
[    4.075543] rk_cam_io(1128):SENSOR_PWRSEQ_PWRDN failed
[    4.075555] rk_cam_io(1117):SENSOR_PWRSEQ_HWRST failed
[    4.105030] EHCI: rk_ehci_hcd_enable, disable host controller
[    4.106373] binder: 126:126 transaction failed 29189, size 0-0
[    4.144400] ret: 0
[    4.173958] soc-camera-pdrv gc0308_front_7: Probing gc0308_front_7
[    4.262490] ret: 0
[    4.410093] Cam_Powerdowm
[    4.410161] soc-camera-pdrv gc0308_front_7: Cannot get I2C adapter #2. No driver?
[    4.518308] Cam_Powerdowm
[    4.587216] ret: 0
[    5.090499] binder: 126:126 transaction failed 29189, size 0-0
[    5.295690] rk312x_delay_workq
[    5.413792]  [off]
[    6.074627] binder: 126:126 transaction failed 29189, size 0-0
[    6.721541] rk818-battery rk818-battery: changed: dsoc=0, rsoc=0
[    7.058757] binder: 126:126 transaction failed 29189, size 0-0
[    7.705514] rk818-battery rk818-battery: changed: dsoc=0, rsoc=0
[    7.706288] rk818-battery rk818-battery: set charge to digital termination mode
[    8.042893] binder: 126:126 transaction failed 29189, size 0-0
[    9.027029] binder: 126:126 transaction failed 29189, size 0-0
[   10.011167] binder: 126:126 transaction failed 29189, size 0-0