|
发表于 2016-10-20 12:06:34
地板
isle 发表于 2016-10-20 10:42
hi I have tested the opengles by glmark2-es2,and the score is 50+
CMD:
sudo apt install glmark2- ...
hi isle,
first, thanks for your reply.
yes, you are right, it works, if program the firmware immediately without any change.
but it is not work, if use the kernel compile by my self.
the steps I performed are:
1. make rk3288-firefly_linux_defconfig
2. make -j8 rk3288-firefly.img
(I have remarked VGA related config in dts for reload board and brcmxxx in makefile)
3. download initrd for kernel 4.4 in below path:
https://github.com/T-Firefly/initrd/tree/for-kernel_4.4
and make by "make -C initrd"
4. generate boot.img by below command
mkbootimg --kernel arch/arm/boot/zImage --ramdisk initrd.img --second resource.img -o boot.img
are there any steps wrong or something different between firmware and kernel source?
thanks a lot |
|