|
|
发表于 2017-4-10 09:32:56
楼主
本帖最后由 h.m_001@163.com 于 2017-4-10 22:23 编辑
亲爱的牛头和众家大神，问一下编译出来的boot.img有多大呢？怎么我的只有8M左右，这正常吗？我从官方固件解压出来的，可是有10M左右啊。我按照教程走在这里，就不行了！
#Boot ver: 2015-07-20#2.19
empty serial no.
checkKey
vbus = 0
board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
no fuel gauge found
no fuel gauge found
read logo_on switch from dts [1]
can't find power_ctr node for lcdc0
can't find dts node for deviceinfo
rk_hdmi_register:fail to read deviceinfo
failed to find part:baseparamer
[EDID-EXTEND] It is a CEA 861 Series Extension.
no baseparametr,find best edid mode,vic=16
hdmi_dev->video.vic is 16
tmdsclk is 148500000
hsync_pol 1 vsync_pol 1
[HDMI] sucess output HDMI.
pll_src = 0, dclk_hz = 148500000, dclk_div = 4
failed to find part:logo
no fuel gauge found
checkKey
vbus = 0
board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
Hit any key to stop autoboot: 0
boot/recovery image sha mismatch!
Unable to boot:boot
try to start recovery
failed to find part:recovery
'recovery' does not seem to be a partition nor an address
Unable to boot:recovery
try to start backup
failed to find part:kernel
ERROR: [rk_load_image_from_storage]: bootrk: bad boot or kernel image
Unable to boot:backup
try to start rockusb |
请问大家是怎么解决的呢
|
|
